Industrial Sealing & Lubrication, Inc.

7838 Leavenworth Road

Kansas City, Kansas

66109
(800) 431 - LUBE (5823)

(913) 334 - LUBE (5823)

(913) 334 - 9468 FAX

"SST" System

APPLICATIONS:

“SST” coolant systems offer spray cooling with features normally costing much more. This unit is designed for production type applications where less frequent filling is desirable. Quality construction is evident in the heavy duty, stainless steel reservoir. These units can stand alone for portability or be permanently mounted to any machine application.

FEATURES:

• Heavy duty 20 gauge, all welded, stainless steel reservoir.
• 1 gallon reservoir capacity.
• Independent air and coolant control for wide delivery range.
• Solid brass fittings.
• 6 in. brass nozzle standard.
• 1 or 2 outlet, 5 ft. plastic lines.
• Includes mounting bracket.

DL Magnum System
DL Spray System

APPLICATIONS:

The DL and DL Magnum spray cooling systems provide cooling solutions for light duty machining and tool room applications. These dispensers are easy to install requiring only shop air and dropping the siphon line into a coolant tank.

FEATURES:

DL

• 7 in. flexible segmented nozzle.
• Solid brass precision needle valve and body.
• 7 ft. coolant pickup line with stainless steel filter.
• Sturdy 60 lb. magnetic base with mounting arm.
• Assembles in less than five minutes.

FEATURES:

DL Magnum

• 15 in. heavy duty metal nozzle conduit.
• Advanced nozzle design for increased chip clearing power and reduced overspray.
• Independent air and liquid controls.
• 6 ft. coolant pickup line with stainless steel filter.
• Sturdy 60 lb. mounting magnet.
• Check valve minimizes delay of fluid upon start-up.
• BSPT threads (green model numbers) are available.

Lil Mister

APPLICATIONS:

Li’l Mister systems offer spray cooling with features normally available with higher cost units. The compact size with a 1 quart reservoir makes the Li’l Mister ideal for tool room and other light duty machining applications. Typical applications include drilling, milling, turning, grinding, and tapping.

FEATURES:

• Easy reading sight gauge.
• 5 ft. plastic or brass armored line.
• Easy mounting bracket.
• Independent air/coolant adjustability.
• One quart reservoir capacity.
• 6 in. straight brass nozzle standard.
• Size - 8 1/2" H x 5 1/4" W x 4" D

Mistmatic

APPLICATIONS:

The Mistmatic allows the user a wide range of coolant delivery. Variable adjustability allows deliveries such as lean, rich, high velocity, or low velocity. Unit can fill “mini-flood” applications with the dual control valving. This unit can cover most machining requirements. Multiple metal removal processes ranging from broaching to grinding can be covered with the Mistmatic. The pressure pumping design of the Mistmatic allows use with a wide range of coolants compatible with Buna-N seals and lower than 1000 SUS viscosity. Auto electric models can be interfaced with machine controls for cyclic capabilities.

FEATURES:

• Air only needed to operate pump.
• HV-3100 control valve with 7 in. segmented plastic nozzle.
• One or two outlet, 5 ft. brass armored lines.
• Independently adjusted air and coolant allows for balancing coolant delivery.
• Platform design capabilities allow for flexible line/nozzle combinations (consult factory).
• Easy reading sight gauge.
• 1 and 4 gallon reservoir capacities.
• Reservoir bracket for easy mounting directly to     machining application.
• 1 gallon dimension = 10 1/2" H x 8 1/2" W x 6" D
  4 gallon dimension = 14 1/2" H x 17 1/2" W x 9" D

Spraymaster

Spraymaster II

APPLICATIONS:

Spraymaster systems provide convenient spray cooling in metal cutting. Requiring only compressed air as a power source, these units are easily installed in many machining applications.

The Spraymaster is designed for use with Tri-Cool synthetic coolant. Various mixtures of coolant to water may be used depending upon individual requirements.

Stainless steel reservoir versions are available with the same performance features as the standard Spraymaster.

FEATURES:

• Air and coolant are independently controlled by solid brass precision needle valves.
• Brass armored lines are a standard 5 foot length.
• 6 in. straight brass nozzle is designed so atomization takes place at nozzle tip for enhanced pattern control.
• Mounting brackets included for easy installation.
• 1 or 2 outlet line models provide maximum flexibility.
• Liquid level gauge easily indicates coolant level at a glance.

Type "B" Spray Coolant System

© Copyright 2002 - 2003 - Industrial Sealing & Lubrication, Inc. - All Rights Reserved